1247 products
1247 products
Sort by:
SIZE: 4.75X1.5
Key Features:
✨ Waterproof
✨ Durable
✨ Perfect for smooth, hard surfaces including glass, metal, & acrylic.
Application Instructions:
✨ Clean the surface thoroughly and allow it to dry.
✨ Place the item on a flat surface.
✨ Peel off the backing paper from the wrap or start on one side and slowly apply for precise placement.
✨ Carefully align the wrap on your item, and make sure to remove any air bubbles.
✨ Use a scraper to apply firm, even pressure.
Important Note: UV DTF prints are permanent once applied. They are NOT repositionable.
Care Instructions:
- Handwash only
- Microwave safe
- Avoid using abrasive cleaners or scrubbing harshly
- Though UV DTF prints are designed for durability, excessive wear and rough handling may cause scratching or chipping.
🚨 Please follow these instructions carefully. UV DTF prints are non-refundable and not eligible for replacement.
Sassy Cow Co. Victoria Ultrafine Iridescent Glitter
Cut Size: 1/128
Why you’ll love our glitter:
- High quality
- Cosmetic grade
- Solvent resistant
- Heat resistant up to 397 degrees F
Sassy Cow Co. glitters can be used in a variety of things such as: epoxy crafts, wax melts, slime, freshies, nails, hair gel, and so much more!
DIRECT TO FILM TRANSFERS: A Direct-to-Film (DTF) transfer is a method where designs are printed onto a special film and then transferred onto fabric using heat and pressure. It’s known for producing vibrant, high-quality prints that adhere well and last through numerous washes without fading or cracking.
TRANSFER SIZE: 10.5 x 11
HOW TO PRESS:
Step 1: Pre-press your shirt for 10 seconds to remove any excess moisture and let shirt cool.
Step 2: Align your DTF Transfer in it's desired position and cover with a **Teflon sheet.
Step 3: Press with HEAVY pressure at 320 for 15 seconds then let transfer cool down COMPLETELY.
Step 4: Remove film, re-cover with a **Teflon sheet and repress at 320 for 10-15 more seconds.
DISCLAIMERS:
**You can use a Teflon sheet, butcher paper, or tissue paper.
Sassy Cow Co. VIDIA Ultrafine SuperHolo Glitter
Cut Size: 1/128
Why you’ll love our glitter:
- High quality
- Cosmetic grade
- Solvent resistant
- Heat resistant up to 397 degrees F
Sassy Cow Co. glitters can be used in a variety of things such as: epoxy crafts, wax melts, slime, freshies, nails, hair gel, and so much more!
Sassy Cow Co. VIGILANTE - Chunky Custom Mix
Cut Size: MIXED
Why you’ll love our glitter:
- High quality
- Cosmetic grade
- Solvent resistant
- Heat resistant up to 397 degrees F
Sassy Cow Co. glitters can be used in a variety of things such as: epoxy crafts, wax melts, slime, freshies, nails, hair gel, and so much more!
SIZE: 4.75X1.5
Key Features:
✨ Waterproof
✨ Durable
✨ Perfect for smooth, hard surfaces including glass, metal, & acrylic.
Application Instructions:
✨ Clean the surface thoroughly and allow it to dry.
✨ Place the item on a flat surface.
✨ Peel off the backing paper from the wrap or start on one side and slowly apply for precise placement.
✨ Carefully align the wrap on your item, and make sure to remove any air bubbles.
✨ Use a scraper to apply firm, even pressure.
Important Note: UV DTF prints are permanent once applied. They are NOT repositionable.
Care Instructions:
- Handwash only
- Microwave safe
- Avoid using abrasive cleaners or scrubbing harshly
- Though UV DTF prints are designed for durability, excessive wear and rough handling may cause scratching or chipping.
🚨 Please follow these instructions carefully. UV DTF prints are non-refundable and not eligible for replacement.
DIRECT TO FILM TRANSFERS: A Direct-to-Film (DTF) transfer is a method where designs are printed onto a special film and then transferred onto fabric using heat and pressure. It’s known for producing vibrant, high-quality prints that adhere well and last through numerous washes without fading or cracking.
TRANSFER SIZE: 11x11
HOW TO PRESS:
Step 1: Pre-press your shirt for 10 seconds to remove any excess moisture and let shirt cool.
Step 2: Align your DTF Transfer in it's desired position and cover with a **Teflon sheet.
Step 3: Press with HEAVY pressure at 320 for 15 seconds then let transfer cool down COMPLETELY.
Step 4: Remove film, re-cover with a **Teflon sheet and repress at 320 for 10-15 more seconds.
DISCLAIMERS:
**You can use a Teflon sheet, butcher paper, or tissue paper.
Sassy Cow Co. Chunky Mix Holographic Blues and Silver. Dark blue stars and silver 4 point stars Glitter
Cut Size: Mixed
Why you’ll love our glitter:
- High quality
- Cosmetic grade
- Solvent resistant
- Heat resistant up to 397 degrees F
Sassy Cow Co. glitters can be used in a variety of things such as: epoxy crafts, wax melts, slime, freshies, nails, hair gel, and so much more!
DIRECT TO FILM TRANSFERS: A Direct-to-Film (DTF) transfer is a method where designs are printed onto a special film and then transferred onto fabric using heat and pressure. It’s known for producing vibrant, high-quality prints that adhere well and last through numerous washes without fading or cracking.
TRANSFER SIZE: 7x7
HOW TO PRESS:
Step 1: Pre-press your shirt for 10 seconds to remove any excess moisture and let shirt cool.
Step 2: Align your DTF Transfer in it's desired position and cover with a **Teflon sheet.
Step 3: Press with HEAVY pressure at 320 for 15 seconds then let transfer cool down COMPLETELY.
Step 4: Remove film, re-cover with a **Teflon sheet and repress at 320 for 10-15 more seconds.
DISCLAIMERS:
**You can use a Teflon sheet, butcher paper, or tissue paper.
Sassy Cow Co. Ultrafine Metallic Blue Glitter
matches with delta
Cut Size: 1/96
Why you’ll love our glitter:
- High quality
- Cosmetic grade
- Solvent resistant
- Heat resistant up to 397 degrees F
Sassy Cow Co. glitters can be used in a variety of things such
as: epoxy crafts, wax melts, slime, freshies, nails, hair gel, and so much more!
SIZE: 4.75X1.5
Key Features:
✨ Waterproof
✨ Durable
✨ Perfect for smooth, hard surfaces including glass, metal, & acrylic.
Application Instructions:
✨ Clean the surface thoroughly and allow it to dry.
✨ Place the item on a flat surface.
✨ Peel off the backing paper from the wrap or start on one side and slowly apply for precise placement.
✨ Carefully align the wrap on your item, and make sure to remove any air bubbles.
✨ Use a scraper to apply firm, even pressure.
Important Note: UV DTF prints are permanent once applied. They are NOT repositionable.
Care Instructions:
- Handwash only
- Microwave safe
- Avoid using abrasive cleaners or scrubbing harshly
- Though UV DTF prints are designed for durability, excessive wear and rough handling may cause scratching or chipping.
🚨 Please follow these instructions carefully. UV DTF prints are non-refundable and not eligible for replacement.
Sassy Cow Co. WARRIOR Custom Chunky Mix Glitter
Cut Size: MIXED
Why you’ll love our glitter:
- High quality
- Cosmetic grade
- Solvent resistant
- Heat resistant up to 397 degrees F
Sassy Cow Co. glitters can be used in a variety of things such as: epoxy crafts, wax melts, slime, freshies, nails, hair gel, and so much more!
SIZE: 4.75X1.5
Key Features:
✨ Waterproof
✨ Durable
✨ Perfect for smooth, hard surfaces including glass, metal, & acrylic.
Application Instructions:
✨ Clean the surface thoroughly and allow it to dry.
✨ Place the item on a flat surface.
✨ Peel off the backing paper from the wrap or start on one side and slowly apply for precise placement.
✨ Carefully align the wrap on your item, and make sure to remove any air bubbles.
✨ Use a scraper to apply firm, even pressure.
Important Note: UV DTF prints are permanent once applied. They are NOT repositionable.
Care Instructions:
- Handwash only
- Microwave safe
- Avoid using abrasive cleaners or scrubbing harshly
- Though UV DTF prints are designed for durability, excessive wear and rough handling may cause scratching or chipping.
🚨 Please follow these instructions carefully. UV DTF prints are non-refundable and not eligible for replacement.
DIRECT TO FILM TRANSFERS: A Direct-to-Film (DTF) transfer is a method where designs are printed onto a special film and then transferred onto fabric using heat and pressure. It’s known for producing vibrant, high-quality prints that adhere well and last through numerous washes without fading or cracking.
TRANSFER SIZE: 10.5 x 11
HOW TO PRESS:
Step 1: Pre-press your shirt for 10 seconds to remove any excess moisture and let shirt cool.
Step 2: Align your DTF Transfer in it's desired position and cover with a **Teflon sheet.
Step 3: Press with HEAVY pressure at 320 for 15 seconds then let transfer cool down COMPLETELY.
Step 4: Remove film, re-cover with a **Teflon sheet and repress at 320 for 10-15 more seconds.
DISCLAIMERS:
**You can use a Teflon sheet, butcher paper, or tissue paper.
Product Description: Western 10x13 Mailers Glossy
Introducing our water resistant Western 10x13 Mailers Glossy, the perfect solution for all your mailing needs. Made with a strong 3.15 mil thickness, these mailers provide durability and protection for your important items. The strong seal with a convenient peel away strip ensures that your mail stays secure during transit. Measuring at 10x13 inches, these mailers are spacious enough to fit a variety of items while still maintaining a sleek and professional appearance. Trust our Western 10x13 Mailers Glossy to deliver your mail safely and securely.
DIRECT TO FILM TRANSFERS: A Direct-to-Film (DTF) transfer is a method where designs are printed onto a special film and then transferred onto fabric using heat and pressure. It’s known for producing vibrant, high-quality prints that adhere well and last through numerous washes without fading or cracking.
TRANSFER SIZE: 11 x 11
HOW TO PRESS:
Step 1: Pre-press your shirt for 10 seconds to remove any excess moisture and let shirt cool.
Step 2: Align your DTF Transfer in it's desired position and cover with a **Teflon sheet.
Step 3: Press with HEAVY pressure at 320 for 15 seconds then let transfer cool down COMPLETELY.
Step 4: Remove film, re-cover with a **Teflon sheet and repress at 320 for 10-15 more seconds.
DISCLAIMERS:
**You can use a Teflon sheet, butcher paper, or tissue paper.
SIZE: 4.75X1.5
Key Features:
✨ Waterproof
✨ Durable
✨ Perfect for smooth, hard surfaces including glass, metal, & acrylic.
Application Instructions:
✨ Clean the surface thoroughly and allow it to dry.
✨ Place the item on a flat surface.
✨ Peel off the backing paper from the wrap or start on one side and slowly apply for precise placement.
✨ Carefully align the wrap on your item, and make sure to remove any air bubbles.
✨ Use a scraper to apply firm, even pressure.
Important Note: UV DTF prints are permanent once applied. They are NOT repositionable.
Care Instructions:
- Handwash only
- Microwave safe
- Avoid using abrasive cleaners or scrubbing harshly
- Though UV DTF prints are designed for durability, excessive wear and rough handling may cause scratching or chipping.
🚨 Please follow these instructions carefully. UV DTF prints are non-refundable and not eligible for replacement.