SIZE: 4.75X1.5

Key Features:

✨ Waterproof
✨ Durable
✨ Perfect for smooth, hard surfaces including glass, metal, & acrylic.

Application Instructions:

✨ Clean the surface thoroughly and allow it to dry. 
✨ Place the item on a flat surface. 
✨ Peel off the backing paper from the wrap or start on one side and slowly apply for precise placement.
✨ Carefully align the wrap on your item, and make sure to remove any air bubbles.
✨ Use a scraper to apply firm, even pressure.

Important Note: UV DTF prints are permanent once applied. They are NOT repositionable. 

Care Instructions:

• Handwash only
• Microwave safe
• Avoid using abrasive cleaners or scrubbing harshly
• Though UV DTF prints are designed for durability, excessive wear and rough handling may cause scratching or chipping.

🚨 Please follow these instructions carefully. UV DTF prints are non-refundable and not eligible for replacement.

SIZE: 4.75X1.5

Key Features:

✨ Waterproof
✨ Durable
✨ Perfect for smooth, hard surfaces including glass, metal, & acrylic.

Application Instructions:

✨ Clean the surface thoroughly and allow it to dry. 
✨ Place the item on a flat surface. 
✨ Peel off the backing paper from the wrap or start on one side and slowly apply for precise placement.
✨ Carefully align the wrap on your item, and make sure to remove any air bubbles.
✨ Use a scraper to apply firm, even pressure.

Important Note: UV DTF prints are permanent once applied. They are NOT repositionable. 

Care Instructions:

• Handwash only
• Microwave safe
• Avoid using abrasive cleaners or scrubbing harshly
• Though UV DTF prints are designed for durability, excessive wear and rough handling may cause scratching or chipping.

🚨 Please follow these instructions carefully. UV DTF prints are non-refundable and not eligible for replacement.

This design is exclusive to Sassy Cow Co and only one other business!! 

DIRECT TO FILM TRANSFERS: A Direct-to-Film (DTF) transfer is a method where designs are printed onto a special film and then transferred onto fabric using heat and pressure. It’s known for producing vibrant, high-quality prints that adhere well and last through numerous washes without fading or cracking. 

TRANSFER SIZE: 11x11

HOW TO PRESS:

Step 1: Pre-press your shirt for 10 seconds to remove any excess moisture and let shirt cool. 

Step 2:  Align your DTF Transfer in it's desired position and cover with a **Teflon sheet.

Step 3: Press with HEAVY pressure at 320 for 15 seconds then let transfer cool down COMPLETELY.

Step 4: Remove film, re-cover with a **Teflon sheet and repress at 320 for 10-15 more seconds.

DISCLAIMERS: 

**You can use a Teflon sheet, butcher paper, or tissue paper.

This design is exclusive to Sassy Cow Co and only one other business!! 

DIRECT TO FILM TRANSFERS: A Direct-to-Film (DTF) transfer is a method where designs are printed onto a special film and then transferred onto fabric using heat and pressure. It’s known for producing vibrant, high-quality prints that adhere well and last through numerous washes without fading or cracking. 

TRANSFER SIZE: 7x8

HOW TO PRESS:

Step 1: Pre-press your shirt for 10 seconds to remove any excess moisture and let shirt cool. 

Step 2:  Align your DTF Transfer in it's desired position and cover with a **Teflon sheet.

Step 3: Press with HEAVY pressure at 320 for 15 seconds then let transfer cool down COMPLETELY.

Step 4: Remove film, re-cover with a **Teflon sheet and repress at 320 for 10-15 more seconds.

DISCLAIMERS: 

**You can use a Teflon sheet, butcher paper, or tissue paper.

DIRECT TO FILM TRANSFERS: A Direct-to-Film (DTF) transfer is a method where designs are printed onto a special film and then transferred onto fabric using heat and pressure. It’s known for producing vibrant, high-quality prints that adhere well and last through numerous washes without fading or cracking. 

TRANSFER SIZE: 11 x 11

HOW TO PRESS:

Step 1: Pre-press your shirt for 10 seconds to remove any excess moisture and let shirt cool. 

Step 2:  Align your DTF Transfer in it's desired position and cover with a **Teflon sheet.

Step 3: Press with HEAVY pressure at 320 for 15 seconds then let transfer cool down COMPLETELY.

Step 4: Remove film, re-cover with a **Teflon sheet and repress at 320 for 10-15 more seconds.

DISCLAIMERS: 

**You can use a Teflon sheet, butcher paper, or tissue paper.

DIRECT TO FILM TRANSFERS: A Direct-to-Film (DTF) transfer is a method where designs are printed onto a special film and then transferred onto fabric using heat and pressure. It’s known for producing vibrant, high-quality prints that adhere well and last through numerous washes without fading or cracking. 

TRANSFER SIZE: 11 x 11

HOW TO PRESS:

Step 1: Pre-press your shirt for 10 seconds to remove any excess moisture and let shirt cool. 

Step 2:  Align your DTF Transfer in it's desired position and cover with a **Teflon sheet.

Step 3: Press with HEAVY pressure at 320 for 15 seconds then let transfer cool down COMPLETELY.

Step 4: Remove film, re-cover with a **Teflon sheet and repress at 320 for 10-15 more seconds.

DISCLAIMERS: 

**You can use a Teflon sheet, butcher paper, or tissue paper.

6 cavity 1.5in circle scent sample, thank you freshie mold.

Silicone mold used for freshies, soap, wax. Heat resistant up to 425 degrees F.

Sassy Cow Co. 1961 Chunky Holographic Mix Glitter

Cut Size: MIXED

Why you’ll love our glitter:

• High quality
• Cosmetic grade
• Solvent resistant
• Heat resistant up to 397 degrees F

Sassy Cow Co. glitters can be used in a variety of things such as: epoxy crafts, wax melts, slime, freshies, nails, hair gel, and so much more!

This design is exclusive to Sassy Cow Co and only one other business!! 

DIRECT TO FILM TRANSFERS: A Direct-to-Film (DTF) transfer is a method where designs are printed onto a special film and then transferred onto fabric using heat and pressure. It’s known for producing vibrant, high-quality prints that adhere well and last through numerous washes without fading or cracking. 

TRANSFER SIZE: 7x8

HOW TO PRESS:

Step 1: Pre-press your shirt for 10 seconds to remove any excess moisture and let shirt cool. 

Step 2:  Align your DTF Transfer in it's desired position and cover with a **Teflon sheet.

Step 3: Press with HEAVY pressure at 320 for 15 seconds then let transfer cool down COMPLETELY.

Step 4: Remove film, re-cover with a **Teflon sheet and repress at 320 for 10-15 more seconds.

DISCLAIMERS: 

**You can use a Teflon sheet, butcher paper, or tissue paper.

Sassy Cow Co. 1995 Chunky Mix Holographic Glitter

Cut Size: MIXED

Why you’ll love our glitter:

• High quality
• Cosmetic grade
• Solvent resistant
• Heat resistant up to 397 degrees F

Sassy Cow Co. glitters can be used in a variety of things such as: epoxy crafts, wax melts, slime, freshies, nails, hair gel, and so much more!

This stunning box has 12 unreleased custom glitter mixes! 

DIRECT TO FILM TRANSFERS: A Direct-to-Film (DTF) transfer is a method where designs are printed onto a special film and then transferred onto fabric using heat and pressure. It’s known for producing vibrant, high-quality prints that adhere well and last through numerous washes without fading or cracking. 

TRANSFER SIZE: 11 x 9

HOW TO PRESS:

Step 1: Pre-press your shirt for 10 seconds to remove any excess moisture and let shirt cool. 

Step 2:  Align your DTF Transfer in it's desired position and cover with a **Teflon sheet.

Step 3: Press with HEAVY pressure at 320 for 15 seconds then let transfer cool down COMPLETELY.

Step 4: Remove film, re-cover with a **Teflon sheet and repress at 320 for 10-15 more seconds.

DISCLAIMERS: 

**You can use a Teflon sheet, butcher paper, or tissue paper.

SIZE: 4.75X1.5

Key Features:

✨ Waterproof
✨ Durable
✨ Perfect for smooth, hard surfaces including glass, metal, & acrylic.

Application Instructions:

✨ Clean the surface thoroughly and allow it to dry. 
✨ Place the item on a flat surface. 
✨ Peel off the backing paper from the wrap or start on one side and slowly apply for precise placement.
✨ Carefully align the wrap on your item, and make sure to remove any air bubbles.
✨ Use a scraper to apply firm, even pressure.

Important Note: UV DTF prints are permanent once applied. They are NOT repositionable. 

Care Instructions:

• Handwash only
• Microwave safe
• Avoid using abrasive cleaners or scrubbing harshly
• Though UV DTF prints are designed for durability, excessive wear and rough handling may cause scratching or chipping.

🚨 Please follow these instructions carefully. UV DTF prints are non-refundable and not eligible for replacement.

Sassy Cow Co. 380 Ultrafine Metallic Gunmetal Gray Glitter

Cut Size 1/96

Why you’ll love our glitter:

• High quality
• Cosmetic grade
• Solvent resistant
• Heat resistant up to 397 degrees F

Sassy Cow Co. glitters can be used in a variety of things such as: epoxy crafts, wax melts, slime, freshies, nails, hair gel, and so much more!

Sassy Cow Co. Glitter

Cut Size: MIXED

Why you’ll love our glitter:

• High quality
• Cosmetic grade
• Solvent resistant
• Heat resistant up to 397 degrees F

Sassy Cow Co. glitters can be used in a variety of things such as: epoxy crafts, wax melts, slime, freshies, nails, hair gel, and so much more!

SIZE: 4.75X1.5

Key Features:

✨ Waterproof
✨ Durable
✨ Perfect for smooth, hard surfaces including glass, metal, & acrylic.

Application Instructions:

✨ Clean the surface thoroughly and allow it to dry. 
✨ Place the item on a flat surface. 
✨ Peel off the backing paper from the wrap or start on one side and slowly apply for precise placement.
✨ Carefully align the wrap on your item, and make sure to remove any air bubbles.
✨ Use a scraper to apply firm, even pressure.

Important Note: UV DTF prints are permanent once applied. They are NOT repositionable. 

Care Instructions:

• Handwash only
• Microwave safe
• Avoid using abrasive cleaners or scrubbing harshly
• Though UV DTF prints are designed for durability, excessive wear and rough handling may cause scratching or chipping.

🚨 Please follow these instructions carefully. UV DTF prints are non-refundable and not eligible for replacement.

DIRECT TO FILM TRANSFERS: A Direct-to-Film (DTF) transfer is a method where designs are printed onto a special film and then transferred onto fabric using heat and pressure. It’s known for producing vibrant, high-quality prints that adhere well and last through numerous washes without fading or cracking. 

TRANSFER SIZE: 10.5 x 11 

HOW TO PRESS:

Step 1: Pre-press your shirt for 10 seconds to remove any excess moisture and let shirt cool. 

Step 2:  Align your DTF Transfer in it's desired position and cover with a **Teflon sheet.

Step 3: Press with HEAVY pressure at 320 for 15 seconds then let transfer cool down COMPLETELY.

Step 4: Remove film, re-cover with a **Teflon sheet and repress at 320 for 10-15 more seconds.

DISCLAIMERS: 

**You can use a Teflon sheet, butcher paper, or tissue paper.