967 products
967 products
Sort by:
DIRECT TO FILM TRANSFERS: A Direct-to-Film (DTF) transfer is a method where designs are printed onto a special film and then transferred onto fabric using heat and pressure. It’s known for producing vibrant, high-quality prints that adhere well and last through numerous washes without fading or cracking.
TRANSFER SIZE: 11 x 11
HOW TO PRESS:
Step 1: Pre-press your shirt for 10 seconds to remove any excess moisture and let shirt cool.
Step 2: Align your DTF Transfer in it's desired position and cover with a **Teflon sheet.
Step 3: Press with HEAVY pressure at 320 for 15 seconds then let transfer cool down COMPLETELY.
Step 4: Remove film, re-cover with a **Teflon sheet and repress at 320 for 10-15 more seconds.
DISCLAIMERS:
**You can use a Teflon sheet, butcher paper, or tissue paper.
SIZE: 4.75X1.5
Key Features:
✨ Waterproof
✨ Durable
✨ Perfect for smooth, hard surfaces including glass, metal, & acrylic.
Application Instructions:
✨ Clean the surface thoroughly and allow it to dry.
✨ Place the item on a flat surface.
✨ Peel off the backing paper from the wrap or start on one side and slowly apply for precise placement.
✨ Carefully align the wrap on your item, and make sure to remove any air bubbles.
✨ Use a scraper to apply firm, even pressure.
Important Note: UV DTF prints are permanent once applied. They are NOT repositionable.
Care Instructions:
- Handwash only
- Microwave safe
- Avoid using abrasive cleaners or scrubbing harshly
- Though UV DTF prints are designed for durability, excessive wear and rough handling may cause scratching or chipping.
🚨 Please follow these instructions carefully. UV DTF prints are non-refundable and not eligible for replacement.
Elevate your crafting game with our FROSTY Mica Powder! Perfect for adding a shimmer to your cosmetics and bath products, this versatile powder is also great for all your crafting needs. Get creative and have some fun with a touch of sparkle!
This glitter adhesive was specially formulated to work hand in hand with glitter. It is fast-drying and creates a sealed-effect once dried. It is one-of-a-kind and will save you time (and glitter)! Get ready.. your glitter game is about to change.
Suggested Use: I recommend a soft bristle brush for application.
This glue is water based and can be mixed with other water based products safely.
*NOT MEANT TO BE USED WITH FOILS. THIS IS NOT A TACK IT TYPE GLUE*
Sassy Cow Co. RAQUELLE ULTRAFINE
Cut Size 1/96
Why you’ll love our glitter:
- High quality
- Cosmetic grade
- Solvent resistant
- Heat resistant up to 397 degrees F
Sassy Cow Co. glitters can be used in a variety of things such as: epoxy crafts, wax melts, slime, freshies, nails, hair gel, and so much more!
Sassy Cow Co. Raven Ultrafine Metallic Glitter
Cut Size 1/96
Why you’ll love our glitter:
- High quality
- Cosmetic grade
- Solvent resistant
- Heat resistant up to 397 degrees F
Sassy Cow Co. glitters can be used in a variety of things such as: epoxy crafts, wax melts, slime, freshies, nails, hair gel, and so much more!
Sassy Cow Co. Ravenclaw Chunky Mix Glitter
Matches with Rowena (Custom Mini Metallic)
Cut Size: MIXED
Why you’ll love our glitter:
- High quality
- Cosmetic grade
- Solvent resistant
- Heat resistant up to 397 degrees F
Sassy Cow Co. glitters can be used in a variety of things such as: epoxy crafts, wax melts, slime, freshies, nails, hair gel, and so much more!
THIS LISTING IS FOR THE WRAP ONLY! COFFEE AND CUP NOT INCLUDED
Sassy Cow Co UV DTF wraps are designed for 16oz Libbey glass cups. However, these prints are versatile and can be used in many ways!
Key Features:
✨ Waterproof
✨ Durable
✨ Perfect for smooth, hard surfaces including glass, metal, & acrylic.
Application Instructions:
✨ Clean the surface thoroughly and allow it to dry.
✨ Place the item on a flat surface.
✨ Peel off the backing paper from the wrap or start on one side and slowly apply for precise placement.
✨ Carefully align the wrap on your item, and make sure to remove any air bubbles.
✨ Use a scraper to apply firm, even pressure.
Important Note: UV DTF prints are permanent once applied. They are NOT repositionable.
Care Instructions:
- Handwash only
- Microwave safe
- Avoid using abrasive cleaners or scrubbing harshly
- Though UV DTF prints are designed for durability, excessive wear and rough handling may cause scratching or chipping.
🚨 Please follow these instructions carefully. UV DTF prints are non-refundable and not eligible for replacement.
Sassy Cow Co. REAPER - Mini Chunky Custom Mix
match to rip and Jericho
Cut Size: MIXED
Why you’ll love our glitter:
- High quality
- Cosmetic grade
- Solvent resistant
- Heat resistant up to 397 degrees F
Sassy Cow Co. glitters can be used in a variety of things such as: epoxy crafts, wax melts, slime, freshies, nails, hair gel, and so much more!
Sassy Cow Co. Ultrafine High Sparkling Metallic Grunge Green Glitter
Cut Size: 1/128
Why you’ll love our glitter:
- High quality
- Cosmetic grade
- Solvent resistant
- Heat resistant up to 397 degrees F
Sassy Cow Co. glitters can be used in a variety of things such as: epoxy crafts, wax melts, slime, freshies, nails, hair gel, and so much more!
DIRECT TO FILM TRANSFERS: A Direct-to-Film (DTF) transfer is a method where designs are printed onto a special film and then transferred onto fabric using heat and pressure. It’s known for producing vibrant, high-quality prints that adhere well and last through numerous washes without fading or cracking.
TRANSFER SIZE: 7x7
HOW TO PRESS:
Step 1: Pre-press your shirt for 10 seconds to remove any excess moisture and let shirt cool.
Step 2: Align your DTF Transfer in it's desired position and cover with a **Teflon sheet.
Step 3: Press with HEAVY pressure at 320 for 15 seconds then let transfer cool down COMPLETELY.
Step 4: Remove film, re-cover with a **Teflon sheet and repress at 320 for 10-15 more seconds.
DISCLAIMERS:
**You can use a Teflon sheet, butcher paper, or tissue paper.
Sassy Cow Co. RECESS Chunky Mix Glitter
Cut Size: MIXED
Why you’ll love our glitter:
- High quality
- Cosmetic grade
- Solvent resistant
- Heat resistant up to 397 degrees F
Sassy Cow Co. glitters can be used in a variety of things such as: epoxy crafts, wax melts, slime, freshies, nails, hair gel, and so much more!
DIRECT TO FILM TRANSFERS: A Direct-to-Film (DTF) transfer is a method where designs are printed onto a special film and then transferred onto fabric using heat and pressure. It’s known for producing vibrant, high-quality prints that adhere well and last through numerous washes without fading or cracking.
TRANSFER SIZE: 11 x 11
HOW TO PRESS:
Step 1: Pre-press your shirt for 10 seconds to remove any excess moisture and let shirt cool.
Step 2: Align your DTF Transfer in it's desired position and cover with a **Teflon sheet.
Step 3: Press with HEAVY pressure at 320 for 15 seconds then let transfer cool down COMPLETELY.
Step 4: Remove film, re-cover with a **Teflon sheet and repress at 320 for 10-15 more seconds.
DISCLAIMERS:
**You can use a Teflon sheet, butcher paper, or tissue paper.